Uniden EZAI2997 Series Using the System While Youre Away from Home, Programming a security code

To...	From the base	From a handset
answer the call	Not available	Press Talk.
mute the call screen	Press Play/stop.	Press Flash/exit or return
without answering		the handset to the cradle.

If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.

Only one handset at a time can screen calls. If another handset is screening the call, the handset beeps and returns to standby.

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code.

Programming a security code

) With the phone in standby, open the menu from any handset.

2)Select Ans. Setup, then select Security Code.

) Use the number keypad to enter a two-digit security code (01 to 99). Press select/Menu when you’re finished.

Remember to make a note of your new security code!

Dialing in to your system

) Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after about ten rings and sound a series of beeps instead of your greeting.)

2)During the greeting (or beeps), press 0 and immediately enter your security code. (You have 3 tries to enter you security code: if you enter it wrong 3 times, the system hangs up and returns to standby.)

) The system announces the current time, the number of messages stored in memory, and a help prompt. Then it starts beeping intermittently to let you know it's waiting for your command.

) When you hear the intermittent beeping, enter a command from the

chart to the right.
	0-1	Repeat message	0-5	Stop playback
If you don't press
	0-2	Play message	0-6	Turn the system on
any keys for 15
seconds, the phone	0-3	Skip message	0-9	Turn the system off
will hang up and
	0-4	Delete message	1-0	Hear help prompts
return to standby.

21