Uniden EZAI2997 Series, EZX290 manual Getting Your Messages, Ans. Setup menu options

Ans. Setup menu options

You can change the answering system options from any handset. Just open the menu and select Ans. Setup.

Security Code	Enter a 2-digit PIN so you can access your answering
	system from any touch-tone phone (see page 21).
	Set the number of rings (2, 4, or 6) before the answering
Ring Time	system answers the phone. Choose Toll Saver (TS) to have
	the system pick up after 2 rings if you have new messages
	or after 4 rings if you don't.
	Set the amount of time callers have to leave a message,
Record Time	either 1 minute or 4 minutes. Choose Announce Only if
	you don't want the system to let callers to leave a message.
	Have the system beep every 15 seconds when you have a
Message Alert	new message; the beeping stops when you listen to all your
	new messages. (To mute the alert without listening to your
	messages, press any key on the base.)
Ans. Language	Change the language of the system's voice prompts.
Call Screen	Turn on the call screen feature so you can hear callers as
	they leave messages on the base speaker (see page 20).
Ans. On/off	Turn your answering system on or off. (To turn your system
	on or off from the base, just press On/off.)

Getting Your Messages

Accessing your answering system from a handset

You can access your				Press MUTE/MESSAGES to start
system from a handset				remote operation mode.
whenever
the phone	1:Repeat	3:Skip		5:Stop	6:SelectGreeting
is in
standby.	2:Play	4:Delete		[ / /select]	8:RecNewGreeting
 During	Use PHONEBOOK/LEFT		to go		Use		CALLER ID/RIGHT to
remote	to the previous option.				go to		the next option.
operation, the		Press SELECT/MENU to			Press	FLASH/EXIT to stop
phone beeps to		choose the current option.			remote	operation mode.

let you know it's

waiting for your next command.

You can press the number key next to the commands instead of scrolling through them.

19