50ACCESSORIES

The use of headphones while detecting, has many advantages. They block out external noise such as wind and traffic, allowing you to listen more closely to target signals. Headphones also minimise disturbance to other people in the area and they extend battery life.

The X-Terra 70 is able to save separate settings for both the speaker volume and headphone volume, switching from one to the other as soon as the headphones are connected

(Volume, pg. 32).

Ensure that the headphone volume

 

 

does not reach an extremely loud

 

level. This may increase the risk of

 

hearing damage.

51

Short Shaft

A short shaft is available to decrease the length of the detector.

Skid Plate

A skid plate comes as standard with the detector. If it wears out from excessive sweeping along the ground, accessory skidplates are available for purchase.

Connecting Headphones

Always use headphones with a ¼“ jack.

Open the rubber headphone cover located on the left hand side of the control box.

Plug the headphone jack into the socket.

When the detector is turned on, the headphones icon will appear on the LCD to indicate that the headphones are connected.

When not using headphones, keep the rubber cover closed to protect the control box electronics from moisture and dust.

Accessory Coils

Are available in different types (Concentric and Double D), sizes and frequencies. These coils are suitable for different ground conditions and specific targets.

To attach an accessory coil:

Turn the detector off using POWER.

Follow the steps of Coil Cable Assembly (pg. 7) and Connecting the Coil (pg. 5) in reverse order to disconnect the coil from the detector.

Repeat the same steps in the correct order to connect a different coil.

Turn the detector on using POWER.

Environmental Cover

Protects the control box

from environmental conditions such as rain and dirt.

Page 28
Image 28
Minelab 4901 - 0059 quick start Accessories