28MENU OPERATION
The
Detection (display state) | Settings (display state) |
ADJUSTING MENU SETTINGS 29
Detection | Settings |
In Coin & Treasure Mode, the Target ID, discrimination segments and depth automatically translate target signals. The last detected Target ID stays on the display until another is detected. If the detector passes over a target that it rejects, the display will return to a detection screen represented by two dashes.
In Prospecting Mode, the numeric identification and the Iron Mask Discrimination Scale are used to indicate the Iron Mask Level. Detections are indicated by sound only.
The
To access the menu settings, press MENU SELECT to repeatedly scroll down through the adjustable settings.
To exit the menu press PINPOINT DETECT.
The last detected Target ID will disappear and the depth icons will flash in sequence until a new Target ID is detected.
The Iron Mask Discrimination level will return.
Exits Settings, and returns to a blank detection display
The
Mode Specific Settings
The Mode Specific Settings are used, and also saved, for one mode only.
›Discrimination Pattern 
› Target Tones
›Target ID Stability
›Iron Mask Level
›Threshold Tone
General Settings
The General Settings do not change when toggling between Coin & Treasure Mode and Prospecting Mode.
› Noise Cancel channel
Mode Dependent Settings
The Mode Dependent Settings are saved separately for each mode. The detector automatically saves the settings of the previous mode when a new detect mode is selected or when the detector
is turned off.
›Sensitivity
›Volume for the speaker
›Volume for the headphones
›Threshold for the speaker
›Threshold for the headphones
›Ground Balance
›Tracking Ground Balance
›Ground Balance (Beach)
Ground Balance can only be accessed via the GROUND BALANCE button.
Sensitivity has a range of
Each segment on the menu scale represents three numbers of the Numeric ID.
Ground balance has a range of
Each segment on the menu scale represents nine numbers of the Numeric ID.
