Using Special Features
Using Do Not Disturb
The Do Not Disturb or DND feature turns off the audio ringers of the base and all handsets at the same time. It does not affect any of the visual ringers.
With the phone in standby, press and hold Do not disturb on the base. The phone automatically turns on the answering system and shows Do Not Disturb in the display on all handsets.
To cancel, press Do not disturb.
If you turn the answering system off while DND is on, the phone turns off DND along with the answering system.
Adjusting the Base Visual Ringer
The Visual Ringer switch is at the back of the base; use this switch to change the brightness of the base visual ringer. (It doesn't affect the audio ringers.)
Slide the switch so that its center (marked with the arrow in the picture) lines up with the brightness you want to
use: High, Low, or Off.
Using the Audio Boost
You can increase the earpiece volume for normal calls and intercom calls. During a call, press Boost to increase the volume of the audio. While audio boost is on, 
appears in the display. Press Boost again to turn off.
Using Text-To-Speech
With the Text To Speech (TTS) feature, your phone can announce phone numbers or names in several different situations.
When you... (from standby) | The phone announces... |
|
|
Receive a call | The caller's name (if sent by a Caller ID service) |
|
|
Dial a number | The phone number you dialed |
|
|
Open the phonebook | The name of the entry you are looking at |
|
|
16
