Changing the Volume
You can set the ringer and speaker volume separately for the base and each handset. You can change the earpiece volume separately for each handset, also.
The available volume levels and when you can change them are listed below. For each item, press Up to make it louder or Down to make it softer.
Change the | When | On the base | On a handset | |
ringer | the phone is in | choose one of 3 | select Off, Low, | |
volume | standby | volume levels or off | Medium, or High | |
|
|
|
| |
speaker | the speaker is playing | choose one of 10 | choose one of 6 | |
volume | (e.g., when you're | volume levels | volume levels | |
listening to messages) | ||||
|
|
|
| |
earpiece | during a call | NA | choose one of 6 | |
volume | volume levels | |||
|
|
To change the volume of Caller ID announcements, change the ringer volume.
Muting the ringer
If you want the base or a handset to stop ringing just for "right now", you can mute the ringer instead of turning it off. Muting the ringer basically turns it off for the current call only: the ringer automatically turns back on when the next call comes in.
While the phone is ringing, press Play/stop on the base or press mute/ messages or Flash/exit on a handset.
Using the Redial List
Each handset saves the last 5 numbers you dial on it.
Open the redial list | Press Redial/pause. |
|
|
Scroll through the | Press Down to scroll through the list from newest to |
list | oldest. Press Up to scroll from oldest to newest. |
|
|
Close the redial list | Press Flash/Exit or Phonebook/left. |
|
|
With the phone in standby, open the list. Find the number you want, then:
to redial the selected number | Press Talk or Speaker. |
|
|
to delete the number | Press Select/menu and select Delete Entry. |
|
|
to save it to the phonebook | Press Select/menu and select Store Into Pb. |
|
|
10
