Apex Digital 5708009-C manual Other Electrical Specifications

Apex 1 to 5.5 kW Generator

Table 3-3.Output Specifications (Continued)

Description	PIN Option and Specification
Warm up	Approximately 2 s from ac-on to RF-on
RF On Response time	< 7 ms (6.4 ms typical)
Turn-off/decay time	10 µs until output decays to 1% of maximum rated value.
Power repeatability	≤ 0.5% over time for same generator for setpoints
	> 500 W. 1% generator to generator as measured against
	AE calorimetric standard
Power cycles, standard options	6 million cycles, 0 to full power into a matched load
Note: Applies to units with	360 kilocycles, 0 to full power into high dissipation load
options 0 through 5 in PIN
position 6.
Power Cycles with DC heating	30 million cycles, 0 to full power into a matched load
option	5 million cycles, 0 to full power into high dissipation load
Note: DC heating option applies
only to units with option 6
or 7 in PIN position 6.

Other Electrical Specifications

Table 3-4 describes the other electrical specifications for the Apex generator.

Table 3-4.Other Electrical Specifications

Description	PIN Option and Specification
Efficiency (line to load)	60%, typical @ full-rated power, nominal line
Power factor	> 0.96
Maximum leakage current	3.5 mA

Master - Slave / CEX (The Apex generator automatically locks the RF output signal phase to the common exciter—CEX—input signal phase when the following conditions are met.)

Phase relationship (RF output inphase with the CEX input signal)

0° ± 5°

5708009-C 3-9