Fostex Comprehensive D2424 Manual: MIDI Commands and Implementation Guide

Model D2424 Reference Manual (MIDI Implementation Chart/MMC List)

it to the default state (meter=4/4, tempo: =120). Also, when this command is received, this equipment will reply with "34 03 (<edit message>)." Upon completing the registeration, <edit message> will reply with "01 (completed)," or with "10 (over value error)" if registeration is attempted at a non-existing point or an erroneous figure is used.

14 04 (<mmc time>): Preroll time set command

The command for setting the current program preroll time at the figure indicated by <mmc time>.

either "32 46 (<edit message=02><mmc time>)" or "32 46 (<edit message=00>)." <mmc time> indicates unprocessed time un- til completion.

22 47: erase status request

The command inquiring execution status of erase.

When this command is received, D2424 will reply by either "32 47 (<edit message=02><mmc time>)" or "32 47 (<edit message=00>)." <mmc time> indicates unprocessed time un- til completion.

14 06 (<frame rate>): Frame rate set command

The command for setting the current program frame rate at the figure indicated by <frame rate>.

14 08 (<time base>): Time base set command

The command for setting the current program time base of this equipment to that indicated by <time base>.

The Status Request Command

22 21: loop operation status request

The command inquiring the loop operation mode setup sta- tus. D2424 will reply with "32 21 (<loop op.mode=12>)."

22 22: loop on/off status request

The command inquiring the loop on/off (=ON/OFF of AUTO RETURN) setup status. D2424 will reply with "32 22 (<on/ off>)."

22 28: post locate status request

The command inquiring the post locate mode (ON/OFF of AUTO PLAY) setup status. D2424 will reply with "32 28 (<post locate mode>)".

22 2D: auto rec status request

The command inquiring the auto rec mode setup status and this is replied by "32 2D (<edit message>)." Reply from D2424 against this status request will be either one of the following:

<edit message> =05: Possible to undo rehearsal mode. =06: Possible to undo take mode. =72: off

22 41: lock status request

The command inquiring the slave on/off setup status and the lock status. D2424 will reply with "32 41 (<lock status>)."

22 42 : lock mode status request

The command for inquiring the lock mode setup status and this is replied with "32 42 <lock mode>."

22 45: copy clip status request

The command inquiring the clipboard condition. If there is a copy paste data in the clipboard, D2424 will reply with "32 45 (<edit message=01>)." If data in the clipboard is for move paste or there is no valid data in it, it will reply will "32 45 (<edit message=14 (void data)>)."

22 46: copy paste status request

The command inquiring execution status of copy paste edit- ing. When this command is received, D2424 will reply with

22 4D: move clip status request

The command inquiring the clipboard status. If there is a move paste data on the clipboard, D2424 will reply with "32 4D (<edit message=01>)." If data in the clipboard is for copy paste or there is no valid data on it, "32 4D (<edit message=14 (void data)>)" will be replied.

22 4E: move paste status request

The command inquiring the move paste execution status. When this command is received, D2424 will reply with "32 4E (<edit message=02><mmc time>)" or "32 4E (<edit mes- sage=00>)." <mmc time> indicates unprocessed time until completion.

23 41: digital in channel status request

23 41: adat in channel status request

The command inquiring the digital in channel setup status. When this command is received, D2424 will reply with “33 41 (<channel> <channel>)” or “33 41 (<channel=7F> <count> <mmc track>).”

23 42: digital out channel status request

23 42: adat out channel status request

The inquiring the digital out channel setup status.

When this command is received, D2424will reply with “33 42 (<channel><channel>)” or “33 42 (<channel=7F> <chan- nel=0>).

23 43: program status request

The command inquiring the presently operating program num- ber. When this command is received, D2424 will reply with "33 43 (<program>)."

23 44: click on/off status request

The command inquiring the metronome on/off status of D2424. When this command is received, D2424 will reply with "33 44 (<on/off>)."

23 45: level status request

The command inquiring the present output level data of the 1~24 tracks. In D2424 as the level data is updated about every 40msec., inquiry in 40msec. units is effective.

When this command is received, D2424 will reply with "33 45 (<count=10><level data>)."

23 46: resolution status request

The command for inquiring the resolution on/off setup status. When this command is received, this equipment replies with "33 46 <on/off>."

140