Fostex D2424 manual 137, Signature map

Model D2424 Reference Manual (MIDI Implementation Chart/MMC List)

<signature map>	bar2, bar1, bar0, sign, sigd
	bar2: The 100th digit of the bar figure is expressed in BCD.
	bar1: The 10th digit of the bar figure is expressed in BCD.
	bar0: The 1 digit of the bar figure is expressed in BCD.
	sign: Numerator of the signature to be set is expressed in BCD.
	sigd: Denominator of the signature to be set is expressed in BCD.
	When specified as sign=00 and sigd=00, signature data of that bar position will be
	deleted. Also, bar2=bar1=bar0=sign=sigd=00 indicates "no corresponding data"
	(such as when a figure specified by <event number> do not exist at receiving the
	signature map request).
<tempo set map>	bar2, bar1, bar0, beat, tmp2, tmp1, tmp0
	bar2: The 100th digit of the bar figure is expressed in BCD.
	bar1: The 10th digit of the bar figure is expressed in BCD.
	bar0: The 1 digit of the bar figure is expressed in BCD.
	beat: The beat figure is expressed in BCD.
	tmp2: Numerator of the tempo to be set is expressed in BCD.
	tmp1: Denominator of the tempo to be set is expressed in BCD.
	tmp0: The 1 digit of the tempo is expressed in BCD.
	When specified as tmp2=tmp1=tmp0=00, tempo data of that bar and meter position
	will be deleted. Also, bar2=bar1=bar0=sign=sigd=00 indicates "no corresponding
	data" (such as when a figure specified by <event number> do not exist at receiving
	the signature map request).
<event number>	When one data registered by <signature map> and <tempo set map> is declared as
	one event, the number of events from head of the tune (the umpteenth event
	counted from head of the tune) must be specified. <event number="00"> is the first
	event.
<midi sync>	00: OFF
	01: CLK (MIDI CLOCK)
	02: MTC
	This corresponds to "MIDI SYNC OUT" of the SETUP menu.
<vari pitch>	Will be composed of two bytes (Q, P).
	Q: 0qqqqqqq (binary) -> <vari data> = "qqqqqqqppppppp" A 14 bit data of X0.1
	P: 0qqqqqqq (binary)	attached with a minus symbol.
	Vari-pitch must be specified, at +0.1% when MSB (q)=0 (Example: 0000000000001),
	and at -0.1% when MSB (q)=1 (Example: 1111111111111).
<frame rate>	00: 30nd
	01: 29.97nd
	02: 29.97df
	03: 25
	04: 24
	05: 30df
	Corresponds to selecting "FRAME RATE" of the SETUP menu.
<MTC offset mode>	00: ABS
	01: signature
	Corresponds to selecting "MTC OFFSET MODE" of the SETUP menu.
<time base>	00: ABS
	01: BAR BEAT
	02: MTC
	Corresponds to selecting "TIME BASE SEL" of the SETUP menu.
<level data>	t1, t2 ...... tn
	n: Indicates the track number.
	tn: Indicates absolute 8 bits of the Audio 16 bit data (Range: 00 ~ 7F).

137