Fostex D2424 manual Registering the Track name

Model D2424 Reference Manual (Editing Tracks)

Registering the Track name

Any type of track name can be registered or edited for each real track/additional track.

In general, after the current drive is formatted, a "Temporary title"("#TRACK 1," etc.) is automati- cally registered for all tracks.

This temporary title can be changed and registered as you wish using the "Track Name Edit?" menu in the SETUP mode.

For example, to allow checking at a glance, sound sources (guitar, keyboard, vocal...etc.) recorded on each track, a maximum 8 digit track name can be registered, such as "Guitar" for track 1, "Keyboard" for track 2, "Vocal" for track 3, and so on.

1.Enter the SETUP mode while in the stop mode by pressing the [SETUP] key.

2.Select the "Track Name Edit?" display by rotating the [JOG] dial, and then press the [EXECUTE/YES]

key.

As shown below, the display will change to selecting the desired track and the track number will flash. In the example below, "01" in "TRK:01" will flash.

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Flashing

SETUP

																									PGM
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

3.Rotate the [JOG] dial while "01" is flashing to select the desired track number, and press the

[EXECUTE/YES] key.

The flashing number will move to the left-end digit to allow input of new letters and symbols (In example below, "#" will flash).

Flashing

SETUP			PGM
OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

4.Numbers and symbols can be input at the selected (flashing) digit by rotating the [JOG] dial, and the flashing digit can be moved with the [SHUTTLE]

dial.

If the [JOG] dial is rotated at the edit point, letters/ numbers/symbols listed in the following can be input. A maximum of 8 digits can be input for a name.

5. After input of the desired track name, press the [EXECUTE/YES] key.

By pressing the [EXECUTE/YES] key, the D2424 will change to the track number selecting display, the same as in Step-2 (Track number will flash).

6.If you wish to continue registering track names, repeat <Step-3> and <Step-4>.

7.Upon completing registering of the track names, press the [EXIT/NO] key to exit from the SETUP mode.

74