Fostex D2424 manual Direct Locate, Press the Locate key again

Model D2424 Reference Manual (Locate Function)

Locate Function

The recorder swiftly locates (it moves the current location of the recorder section) the desired point when necessary. Locate include edit points (in ABS time, MTC time, or in bar/beat/clock) that are stored for the Copy, Move, Paste, Erase, or Auto Punch In/Out operations.

They also include Locate by specifying a voluntary time, and Locate specifying a voluntary Locate Number (01-99), as well as Locate directly to the recording end point in a Program (REC END). An application of he Locate function includes auto functions such as Auto Play, Auto Return and Auto Repeat.

Direct Locate

The Direct Locate function enables you to locate the following points:

•Locate the beginning of the Program (LOCATE ABS 0)

Press the [REWIND] button while holding down the [STOP] button.

The recorder will immediately locate the beginning of the currently-selected Program.

•Locate the recording end point of the Program (LOCATE REC END)

Press the [F FWD] button while holding down the [STOP] button.

The recorder will immediately locate the end point of the currently-selected Program.

•Locate the position stored in one of the memory keys

Press the desired memory key, then press the [LOCATE] key.

The recorder will locate the point (edit point) stored in the corresponding memory key immediately.

The located time data is always stored as time data in Locate Number 00.

• Specify the Locate Number to locate data

1. Press the [RECALL] key.

The Locate Number selection menu appears.

																							LOCATE
																				H		M	S	F	SF
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

2. Turn the [JOG] dial or press the [NEXT] key/[PREV] key to select the desired number.

3. Press the [LOCATE] key once.

The time stored in the selected Locate

Number appears.

4. Press the [LOCATE] key again.

The time data of the selected LOCATE number is swiftly located. The located time data is constantly stored as time data in Locate Number 00.

•Locate a specified point

Refer to “Editing and storing locate data” in the chapter “Storing a Locate Point (Edit Point)” for information on how to edit the data and on pressing the [LOCATE] key instead of the [STORE] key.

The point at specified time value (or bar/beat/clock value) will be located immediately.

•Locate the last-located point

Directly press the [LOCATE] key.

The time data of Locate number 00 is located. Locate number 00 is always update with the last data located (excluding LOCATE ABS 0 and LOCATE REC END). Therefore, you will locate the data in memory number 00 every time you directly press the [LOCATE] key.

54