Model D2424 Reference Manual (Names and Functions)

<Note>

If a correct value is not stored, pressing the [AUTO PUNCH] key will not enable the function, and the message “Void Out Point!” will appear.

If a correct value is not stored, pressing the [AUTO PUNCH] key will not turn on the function, and the message “Void Out Point” will alert you. In this case, set a correct value for the Auto Punch In/Out point.

Also, the function is not turned on when you press the [AUTO PUNCH] key if the disk does not have enough recording space. The display will indicate “-**h**m**s**f Over.”

Punch In/Out mode

*Refer to page “105” for details on the SETUP mode.

*Refer to the APPENDIX at end of this manual in regards to the TC generator mode.

*Refer to page "64" for details on multiple undo function.

*Refer to the Quick Operation Guide in regards to editing of Vari Pitch data.

*Refer to page "62" for details on preview.

*Refer to page "60" for details on the envelope function.

<Note>

Ejecting or removing the backup SCSI disk is only possible when the drive is set to [SCSI*] via the SETUP mode "Setup of the drive." If the drive is set to [IDE], eject it using the SCSI drive EJECT switch.

Auto Punch In/Out

AUTO

PUNCH

REHEARSAL

 

TAKE

Rehearsal Take

AUTO

PUNCH REHEARSAL AUTO REHEARSAL PUNCH

TAKE

TAKE

Rehearsal Punch In/Out using a foot switch or MMC (Auto Punch mode ODD).

AUTO

PUNCH REHEARSAL

TAKE

Rehearsal

Take

 

AUTO

REHEARSAL

AUTO

REHEARSAL

PUNCH

PUNCH

 

 

 

TAKE

 

TAKE

32. All Input LED [ALL INPUT]

This is lit when all track input monitors are set to ON by pressing the [TRACK SHIFT] key while pressing the [SHIFT] key, and extinguished when set to OFF. While in the SETUP mode, it is also possible to automatically set it to all input monitors while the recorder is in the stop mode.

* For details, refer to page 28 at end of this manual.

:go off

:light up

:blink

*Refer to page “39” for details about Punch In/Out operation.

33. Track shift LED [9-16, 17-24] (green)

This is lit when the selectable recording track is shifted to 9-16 or 17-24.

31. Shift key [SHIFT]

Press a key, or button while holding down the [SHIFT] key to activate the following “shift-invoked” functions.

Key with SHIFT function

Function

 

 

RECORD TRACK SELECT keys

Executes the envelope function of

the selected track.

 

 

TRACK SHIFT key

Switches ON/OFF of the input

monitor for all tracks.

 

 

 

RECORD button

Switches SAFE-READY for all tracks.

 

 

CLIPBOARD IN/OUT key

Executes preview of the stored point

 

AUTO PUNCH IN/OUT key

of each memory key.

 

AUTO RTN START/END key

 

 

 

EXIT/NO key

Ejects disk in the external SCSI drive.

Please see <Note> below.

 

 

 

EXECUTE/YES key

Switches the slave mode ON/OFF.

 

 

DISP SEL key

Selects the time base.

 

 

EDIT key

Switches TC READY ON/OFF.

 

 

SETUP key

Enters the TC GEN setup mode.

 

 

UNDO/REDO key

Enters the multiple undo executing

mode.

 

 

 

VARI PITCH key

Enters the vari pitch data editing

mode.

 

 

 

34. Hard disk access LED (green)

This LED lights up or blinks when the hard disk is writing or reading data.

<CAUTION>

Do not turn the power off while this LED is lit or blinking. Otherwise, data on the hard disk may be damaged.

35. Foot switch jack [FOOT SW]

(Connector: PHONE jack)

Punch in/out (also for rehearsal) or PLAY/STOP of the recorder can be done by foot by connecting the optional foot switch.

The foot switch function can be changed in the SETUP mode. It will not function for punch in/out function in the initial setting.).

*Refer to page “42” for information about Punch In/ Out recording using the foot switch.

<Note>

Be sure to use an “unlatch type” foot switch if you use a foot switch other than the Model 8051. Otherwise, a malfunction could occur.

36. Meter display

This meter display shows the signal level and settings.

* Refer to the “Display section” on page “19.”

17

Page 17
Image 17
Fostex D2424 manual All Input LED ALL Input, Track shift LED 9-16, 17-24 green, Shift key Shift, Hard disk access LED green