Fostex D2424 Display of void, Invalid In/Out indication, Action to take, Overtime indication

Model D2424 Reference Manual (Names and Functions)

You can select the desired Program from the already setup Programs by rotating the [JOG] dial while the Program number and “SURE ?” are flashing.

After you select a Program, press the [EXECUTE/ YES] key to return to the selected Program’s ABS indication.

The Time Base display will indicate the selected Program’s Time Base, since you can set the Time Base for each Program individually.

To change the Time Base display after you have selected the desired Program, press the [DISP SEL] key while holding down the [SHIFT] key.

Pressing only the [DISP/SEL] key will take you to the REMAIN display based on the current Time Base.

<Notes>

•The maximum record time of the program is dependent on the permissible record time (size) of the hard disk, regardless of how many programs are created on the disk. If, for example, there is roughly 30 minutes of record time remaining (REMAIN) on the current drive immediately after it is formatted, and a 20 minute program is recorded in Program 1, then there is only 10 minutes of recording time remaining for any additional programs.

Simply put, if the total record time is 30 minutes it does not matter whether the 30 minutes is taken by 1 program or shared among several programs, since the total of 30 minutes for a recording remains the absolute total.

Note that some disk space is compensated when several programs are created on the disk. A new program cannot be created when there is no recordable space remaining on the disk. However, programs produced by "Program duplicating" are exempted.

•For initial setup, when producing a new program, the initial setting of the currently active program is directly copied. For example, if there is a randomly set tempo map in the current program, that tempo map setting will be copied as the tempo map for the new program. This is convenient for producing a new program with the same setting as previously made music.

Display of void:

This is displayed if you attempt some sort of process for which the optional Model 8345 TC/SYNC card is necessary and is not installed.

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Invalid In/Out indication:

The In or Out point is not appropriate for the operation.

Action to take:

Input correct data.

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Overtime indication:

Available disk space is insufficient for the length of time (the number of measures) indicated on the display.)

H M S F

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Action to take:

During the copy & paste and move & paste operation, try to shorten the length of the copied data by the indicated amount. Alternatively, use the “ERASE” function to move the ABS END point backward to obtain enough disk space for editing.

<Note>

Optimizing the disk is necessary in the current drive in which multiple undo is ON.

6. Warning messages

If you perform an incorrect operation, input incorrect data, or if an error occurs, the following alarm indication appears:

Invalid data indication:

The input data is not appropriate for the operation.

Action to take:

Input correct data.

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Unassigned track indication:

Select any track.

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Action to take:

Use the RECORD TRACK select key to ready any track.

22