11
OperationTV Selection
Turn on the TV, the DVD player and the Audio Amplifer System (if any).
1. Press the “TV/VIDEO” button on the TV.
2. Select the Video Mode (TV).
Note: If there are more than 1 AV channel for the TV, select the channel you have
connected to the DVD player.
3. Select the Correct Audio Input on the AV Amplifier (if any)
Play Discs
1. Press the OPEN/CLOSE button ( ) on the front panel and load the Disc on the
tray. The label side should be facing upwards. For a Double-sided DVD Disc, put
the disc with label A/1 up.
2. Press the OPEN/CLOSE button ( ) again to close the tray and the disc will be
loaded.
3. The Disc will be played automatically.
•If it is a DVD disc, it will show the Menu/Title Page on the screen.
•If it is a CD, it will play the first track directly.
4. Press the STOP button ( ) if you want to stop the Disc playback. You can resume
playback by pressing the PLAY button and it will start at the location where you have
pressed stop (Resume Play).
5. Press the STOP button twice to have the Disc stop completely.
Pause /Play
This function is applicable for DVD and CD audio.
•For DVD, the picture will freeze.
•For CD audio, the sound will be muted.
1. Press the PAUSE button ( ) to pause play.
2. Press the PLAY button again to resume Play.
DVD Setup Mode
•Setup Mode provides the menu for the configuration of TV DISPLAY Mode, OSD
LANGUAGE Mode and AUDIO Mode etc.
•Item selection in the SETUP menu is done by using the Direction buttons and the
ENTER button.
•To exit the SETUP menu, press the SETUP button again.
Note: To setup the TV display mode, the player must be stopped.