Various settings

NEW DISC FORMAT

If you insert an unused disc, the disc is automatically formatted.

If you use the DVD-RW (Ver.1.1/1.2), you can select the mode to be used for automatic format.

Select ÒNEW DISC FORMATÓ and select the mode from the list below.

VR: Format the disc in the VR mode.

VIDEO: Format the disc in the Video mode.

When you insert an unused disc, the following message screen will appear.

NEW DISC FORMAT

VIDEO MODE

START CANCEL

¥When you select ÒSTARTÓ and press ENTER, the formatting will start. The screen below will appear.

INITIALIZING DISC

VIDEO MODE

¥When format finished, ÒFORMATTING COMPLETED PRESS ENTERÓ will appear.

Press ENTER, the normal TV screen will appear.

¥When you select ÒCANCELÓ and press ENTER, the normal TV screen will appear.

NOTE:

If a recorded disc has scratches or contamination on it, the ÒNEW DISC FORMATÓ screen may appear.

If this happens, select ÒCANCELÓ.

FINALISE

To play a DVD disc recorded on this unit you must finalise the disc to ensure compatibility with other DVD players. In addition if you are using a DVD-RW disc you must record in Video mode.

When ÒFINALISEÓ is selected, the screen below will appear.

FINALISE

START CANCEL

¥When you select ÒSTARTÓ and press ENTER, finalisation will start. The screen below will appear.

FINALISING

PLEASE WAIT

¥When you select ÒCANCELÓ and press ENTER, the DISC SETUP screen will appear.

02

NOTES:

¥During the finalisation the cursor will move repeatedly. When the finalisation finished, ÒFINALISING COMPLETED PRESS ENTERÓ will appear. Press ENTER, the normal TV screen will appear.

¥The finalisation process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc.

¥You can record or edit a finalised DVD-RW (in VR mode) by cancelling the finalising, but you cannot do these opera- tions with a DVD-RW (Video mode), or with a DVD-R.

¥This unit may not be able to record or edit a disc which was recorded or edited using another DVD recorder.

¥You cannot playback a disc recorded on VR mode on a unit that does not support DVD-RW.

¥Even if you finalise a disc in the Video mode, the disc cannot be played back in some DVD players.

¥A DVD-R disc can not be named after it is finalized.

PROTECT DISC

You can protect a disc to prevent the content recorded on it from being erased, edited or re-recorded.

Only DVD-RW (in VR mode) can be protected.

Select ÒPROTECT DISC (VR ONLY)Ó and select ÒONÓ to protect the disc.

To cancel the disc protection, select ÒOFFÓ.

UNDO FINALISE

You can cancel the finalisation of a finalised DVD-RW (in VR mode).

You cannot cancel the finalisation for discs other than above. You can record or edit on a disc whose finalisation has been cancelled.

Select ÒUNDO FINALISEÓ, and the screen below will appear.

UNDO FINALISE

START CANCEL

¥When you select ÒSTARTÓ and press ENTER, the cancelling finalisation will start. The screen below will appear.

UNFINALISING

PLEASE WAIT

¥When you select ÒCANCELÓ and press ENTER, the DISC SETUP screen will appear.

NOTES:

¥During the cancelling finalisation the cursor will move repeatedly. When the cancelling finalisation finished, ÒUNDO FINALISING COMPLETED PRESS ENTERÓ will appear.

Press ENTER, the normal TV screen will appear.

¥The cancelling finalisation process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc.

¥When the discÕs finalisation cannot be cancelled, you cannot select ÒUNDO FINALISEÓ.

23

En

2H30301B_En_18_29

23

8/4/05, 19:20

Page 23
Image 23
Pioneer DVR-RT501-S operating instructions NEW Disc Format