01Before using your unit

Basic connections

Connect your VCR/DVD to your main aerial and TV set as shown in the illustration. When you have finished making these connections, connect your VCR/DVD to the mains power supply (230V / 50Hz).

Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

TV

Aerial

Aerial-Input

To SCART socket

 

DECODER/EXTERNAL SCART Socket (AV2)

VCR/DVD

TV Scart socket (AV1)

 

RF-Input

(from house antenna) RF-Output (to TV)

AC power cord 230V/50 Hz

Supplied SCART cable

Supplied Coaxial cable

Connecting this unit to your TV using the SCART connections

In addition to the coaxial cable connection, you should also connect the supplied SCART cable from the VCR/ DVD to your TV as shown. As well as transferring the high quality pictures and sound to your TV, the SCART connection can automatically switch the TV to its AV channel for playback.

Some TVs may not allow automatic switching to the AV input channel. In this case you should manually select the AV input setting on your TV's controls when playing through this unit.

Playback connection

The exact arrangement you use to interconnect various video and audio components to the VCR/DVD is dependent on the model and features of each component. Check the Operation Manual provided with each component for the location of SCART socket.

Connection to a Satellite Receiver

If a Satellite Receiver is used, we recommend the following configuration:

TV

VCR/DVD

Satellite

Satellite Receiver

Antenna

SCART-cable (supplied)

SCART-cable (not supplied)

To record from Satellite Receiver press INPUT SELECT on the remote control of the VCR/DVD. ÒA1Ó

16will appear on the front display. Select the particular satellite channel on the Satellite Receiver.

En

2H30301B_En_12_17

16

8/4/05, 19:20

Page 16
Image 16
Pioneer DVR-RT501-S Basic connections, Playback connection, Connecting this unit to your TV using the Scart connections