Various settings
Replace TV station positions
You can replace the channel positions as you like.
Example: Replace the TV station No. 6 with position No. 2.
1Select ÒCH TUNINGÓ and press ENTER.
2Select ÒCHÓ and press ENTER. Then select the moving channel position number (6) and press
ENTER.
CH6
SKIPOFF
MOVE6
3Select ÒMOVEÓ and press ENTER.
CH6
SKIPOFF
MOVE6
4Select the channel position number (2) to which the selected position at step 2 above is to be moved and press ENTER. Now these channel positions were replaced with each other.
Manual TV station presetting
The Automatic station presetting function (See page
28)memorises the available broadcasts to suitable CH positions.
Some broadcasts may not be preset correctly by the automatic tuning system - in this case you can tune stations manually as follows.
Example: Presetting a station on program position 5.
1Select ÒCH TUNINGÓ and press ENTER.
2Select ÒCHÓ and press ENTER. Then select the channel position number (5) and press ENTER.
CH5
SKIPOFF
MOVE5
3Select ÒTUNINGÓ (tuning scale) and press
ENTER.
CH5
SKIPOFF
MOVE5
TUNING
02
4Press A (rising frequency) or B (falling frequency) once. The search starts. It stops at each broadcast automatically. (ÒAÓ changes to Ò Ó) Press B or A repeatedly until the desired station appears. If the broadcast is too weak (eg. with a drifting picture), the search will not stop. If you want to stop, press C/D or B/A.
CH5
SKIPOFF
MOVE5
TUNING
SEARCHF. TUNE
ENTER | ENTER | RETURN | BACK | SETUP | END |
5If the
6Repeat the steps 2 and 5 to preset other TV stations.
NOTE:
Occasionally, the auto search might catch a weak signal and stop. If the TV station signal is weak, you shouldn't store this station. In that case restart the auto search using B or A.
29
En
2H30301B_En_18_29 | 29 | 8/4/05, 19:21 |