Planar PR5022 manual Resetting the Lamp, Cleaning the Lens, Cleaning the Projector

DLP® Projector – User’s Manual

Resetting the Lamp

After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:

1.

2.

3.

4.

Press the Menu button to open the Main menu.

Press the cursor button to move to the Status menu.

Press the cursor button to

move down to Lamp Hour Reset.

Press the cursor or Enter button.

A message screen appears.

5. Press the cursor buttons in this order: ; ; ; .

The Status menu appears again showing the Lamp Hours reset to zero.

Cleaning the Projector

Cleaning the projector to remove dust and grime will help ensure trouble-free operation.

Warning:

1.Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn.

2.Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector.

3.If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated room for several hours before using.

4.If a lot of water gets into the projector interior when cleaning, have the projector serviced.

Cleaning the Lens

You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the pro- jector lens.

– 37 –