DLP® Projector – User’s Manual
Setting an Access Password (Security Lock)
You can use the cursor (arrow) buttons to set a password and prevent unauthorized use of the pro- jector. When enabled, the password must be entered after you power on the projector. (See “Navigating the OSD” on page 20 and “Setting the OSD Language” on page 21 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector. If you lose the password, contact your reseller for information on clearing the password.
1.
2.
3.
4.
5.
Press the Menu button to open the OSD menu.
Press the cursor 
button to move to the Setup menu.
Press the cursor 
button to select Advance Feature and press Enter or
.
Press the cursor 
button to select
Security Lock.
Press the cursor Enter or 
button to select Enable. (White text is selected.) A password dialog box automatically appears.
6 You can only use the following four cursor buttons: 
in the password fields. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. When you confirm the password, OK appears.
– 15 –
