Pioneer DVR-RT501-S operating instructions Still by Frame, Video, Òrgbó

Various settings

STILL MODE

You can set the type of image displayed on the TV screen when the playback of the DVD is stilled. Select ÒSTILL MODEÓ and select the image to be displayed from the list below.

AUTOMATIC

The field still or frame still is automatically selected. (For normal use.)

STILL BY FRAME

The frame still is set.

Note for the field still and frame still:

¥Field* still

Since only one field (half of the video information) is shown on the TV screen, the picture appears rough but does not shake.

¥Frame* still

Two fields are alternatively shown on the TV screen. The picture shakes but the resulting picture quality is superior to the field still pictures.

Field*: A field refers to the video information in one-half of a frame. 1 frame (screen) consists of 2 fields.

Frame*: A frame refers to the total area occupied by each picture on the TV screen.

NO NOISE BACKGROUND

When you select a channel where the broadcast has finished or no broadcast is set, the TV screen will automatically appear blue.

The function above works when you select ÒNO NOISE BACKGROUNDÓ and select ÒONÓ from the list. If you donÕt want to use this blue background function, select ÒOFFÓ.

The default setting is ÒONÓ.

BRIGHTNESS

You can control the brightness level of the image. Select ÒBRIGHTNESSÓ and select the level from the list below.

MAX: The image becomes brighter.

STD: The image is of standard brightness.

MIN: The image becomes darker.

02

DVD OUTPUT

You can select the output signal of DVD playback pic- ture to the TV screen as an RGB signal, a COMPO- NENT VIDEO signal or a S-VIDEO signal.

RGB:RGB signal(AV1)

COMPONENT: COMPONENT VIDEO signal

S-VIDEO: S-VIDEO signal (AV1)

NOTES:

¥If you select COMPONENT, refer to the connections shown on page 17.

¥An RGB output is available when being connected to TV using SCART connector.

When you press STOP on the front panel for 5 sec- onds, DVD OUTPUT setting will be restored to

ÒRGBÓ.

¥Use the appropriate connection setting for your TV. Refer to the owner's manual for your TV for details.

¥Depending on its specifications, your TV may not be able to receive RGB output from this unit.

¥If you connect the unit to your TV with S-VIDEO sig- nal input, a black and white image may be displayed for around 10 seconds when you start the unit up.

AV3 INPUT

You must select the input mode of AV3 (front AV- input). (see the upper connection on page 81)

S-VIDEO:	Only the S-Video signal will be
(DVD only)	input.
	(Composite video signal will be
	cut.)
VIDEO:	Only the composite video signal
	will be input. (S-Video input signal
	will be cut.)

25

En

2H30301B_En_18_29 25 8/4/05, 19:20