Recording

DVD-Video VR mode

DVD-R

VCR

Auto Rewind feature

This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape.

NOTES:

¥If the disc space become full, the recording is stopped and ÒRECORDING INTERRUPTEDÓ will appear on the screen.

¥In the event of a power failure during DVD recording including OTR and TIMER REC, the program can not be recorded on the disc. When the power resumes, after theVCR/DVD is turned on, the set checks the disc to repair the error which is caused by a power failure. This checking process may require about 1 minute 30 seconds according to disc condition. In this process ÒSYSTEM ERROR PLEASE WAIT DISC CHECKINGÓ will appear on the screen.

05

To stop recording

Press STOP to stop recording.

NOTE:

When recording onto a DVD, even if STOP is pressed during recording, recording does not stop instantly due to the concluding process of recording. Recording may continue for as long as 1 minute maximam. While this pro- cess, ÒPROCESSING PLEASE WAITÓ will appear on the screen.

To stop recording temporarily

Press PAUSE/STILL to avoid recording unwanted material.

Ò4Ó will appear on screen for about 4 seconds.

Press again to resume recording.

NOTES:

¥In the recording onto a video tape, the pause function will be released after 5 minutes to prevent damage the video tape. The unit will change to the STOP mode.

¥When recording onto a video tape, you can change a recording channel in the recording pause mode. (You cannot change a recording channel in the DVD recording pause mode.)

¥Chapter marks are made when recording to a DVD in the VR Mode.

53

En

2H30301B_En_50_53

53

8/4/05, 19:23

Page 53
Image 53
Pioneer DVR-RT501-S operating instructions To stop recording temporarily