Pioneer DVR-RT501-S operating instructions Error/Warning message list, Cause Possible Solutions

Additional information 08

Error/Warning message list

	ERROR/WARNING MESSAGE	CAUSE	POSSIBLE SOLUTIONS	PAGE
Power ON		The power was shut down without completing the
	SYSTEM ERROR	termination process due to a power failure or dis-	Wait until the message disappears.	--
	PLEASE WAIT	connection of the AC cord plug. (Abnormal termi-
		nation)
	SYSTEM ERROR	The power was abruptly turned off before writ-	The data is now restoring.	--
	PLEASE WAIT	ing to the disc was completed.
	DISC CHECKING
	SYSTEM ERROR		Press ENTER, then the screen re-
		The data restoration was completed.	turns to the normal display.The data	50
	DISC MIGHT BE FAILED
			may not be restored even if the res-
	PRESS ENTER
			toration process is performed.
Playback	NO DISC	PLAY was pressed when a disc was not loaded	Load a disc.	30
		into the unit.
	REGION CODE ERROR	A disc specified other than ÒRegion 2Ó or ÒRegion	A disc specified other than ÒRegion
			2Ó or ÒRegion ALLÓ cannot be played	9
		ALLÓ was loaded.
			back.
	INCORRECT DISC - C104, C105,	The disc cannot be identified.	Check to make sure that the disc is	9
	C106, C107		compatible with this unit.
	PROGRESSIVE OUTPUT. STOP	When the unit was not connec-ted to the TV with	Press PROGRESSIVE in the stop
	DISC PLAY BACK THEN PRESS	the component video cables, PROGRESSIVE	mode to make the progressive	45
	PROGRESSIVE TO CANCEL.	was pressed.	scanning mode inactive.
Recording	NO DISC	REC was pressed when a disc was not loaded	Load a disc.	52
		into the unit.
	PROCESSING PLEASE WAIT	The recording termination is processing.	Wait until the process is completed.	--
	RECORDING INTERRUPTED -	Disc became full during recording.	Erase unnecessary titles or load	74
	C204		another disc and restart recording.
	CANNOT RECORD - C203	Recording was tried onto the disc having no space.	Check the disc space.	32
	CANNOT RECORD - C206	Recording was tried onto the disc which does not	Load a recordable disc.	10
		support recording.
	CANNOT RECORD - C207	Disc erase-protection is applied.	Set ÒProtect discÓ to ÒOFFÓ.	23
	CANNOT RECORD - C208	Recording was tried onto the finalised disc.	Undo finalisation or load another	23
			disc for recording.
	CANNOT RECORD - C209	Adding data was tried onto the disc recorded in	Load another disc for recording.	--
		the other unit.
	CANNOT RECORD - C210	Adding data was tried to the disc where PC data	Load another disc for recording.	--
		was recorded.
	DISC ERROR - C205, C211, C212,	A scratch or contamination was found on the disc.	Check the disc and reload it, or use	--
	C213		another disc for recording.
	CANNOT RECORD EXCEEDS LIM-	99 titles were recorded on the disc.	Erase unnecessary titles or load	74
	ITED NUMBER OF TITLES.		another disc.
	CANNOT RECORD, EXCEEDS	999 chapters were existed on the disc.	Erase unnecessary chapters or	71
	LIMITED NUMBER OF CHAPTER.		load another disc.
	CANNOT RECORD PROTECTED	You tried to record a copy-guard video.	You cannot record the video con-	51
	IMAGE.		taining copy-guard signal.
	RECORDING INTERRUPTED PRO-	The video was changed to a copy-guard format	You cannot record the video con-	51
	TECTED IMAGE.	in recording.	taining copy-guard signal.
	CANNOT RECORD INVIDEO MODE.	You tried to record the ÒCopy OnceÓ program onto	Load a DVD-RW Ver. 1.1/1.2 (VR	51
	COPY IMAGE ONCE ONLY.	a disc (Video mode).	mode) with CPRM.
	CANNOT RECORD ON DISC.	You tried to record the ÒCopy OnceÓ program onto	Load a DVD-RW Ver. 1.1/1.2 (VR	51
	THIS IS NOT CPRM DISC.	a disc without CPRM.	mode) with CPRM.
	TIMER RECORDING ERROR	When a recordable tape is not inserted or no disc	Load a recordabl tape or disc.	58, 61
	PLEASE CHCK THE DISC OR TAPE	space is available, TIMER REC was pressed.
Dubbing	CANNOT COPY DATA - C251	No video tape or disc is inserted as a source for	Load a video tape or disc into the	78, 79
		the recording.	source drive.
	CANNOT COPY DATA - C254, C255	The source video or disc to be copied is copy-	You cannot dub a video containing	51
		guarded.	copy-guarded material.
	COPYING INTERRUPTED	The video tape or disc became full during dubbing.	Load another video tape or disc for	78, 79
			recording and restart.
	DISC ERROR - C302, C303	Cannot Format disc due to a scratch or contami-	Check the disc and reload it, or use	--
Disc setup		nation on the disc.	another disc for recording.
	DISC ERROR - C304, C305	Cannot Finalise disc due to a scratch or con-	Check the disc and reload it.	88
		tamination on the disc.
	DISC ERROR - C306	Cannot Undo Finalise disc due to a scratch or	Check the disc and reload it.	88
		contamination on the disc.
	DISC ERROR - C307, C308	Cannot Protect disc ON/OFF due to a scratch	Check the disc and reload it.	88
		or contamination on the disc.
	CANNOT EDIT	Editing cannot be performed due to a scratch or	Check the disc and reload it, or use	--
		contamination on the disc.	another disc for recording.
Title Menu
			Chapter marks that have been
	CANNOT EDIT - C408	Combining chapters cannot be performed.	added automatically in the erasing	73
			of a scene procedure cannot be
			erased.
	PROCESSING PLEASE WAIT	A process requiring a longer time such as edit-	Wait until the process is complete.	--
		ing is being performed.

NOTE: It is possible that other warning messages other than this listed above could appear.

If this happens, please check the possible solutions above as they could still provide an explanation.

85

En

85

En

2H30301B_En_82_Back 85 8/4/05, 19:27