Zero Return function

Tape playback

ZERO RETURN function / Video index searchsystem

	VCR	1 Press DISPLAY.
	ZERO RETURN function	The counter display shows the tape
	ZERO RETURN function	running time during playback or recording.
	This function makes tape	running time during playback or recording.
	This function makes tape
	rewinding (or forwarding) stop at
	the counter “00:00:00” position
	automatically.
		2 Press COUNTER RESET at the desired
		tape position. The counter display will be
		reset to the Ò00:00:00Ó position (e.g. the
		beginning of recording).
		3 Press STOP when playback or recording is finished.
		Press ZERO RETURN.
		The tape will be rewound or fast forwarded and automatically
		stop at the Ò00:00:00Ó position.

Switching the display between clock and counter

Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display.

Video index search system

NOTES for Counter Display:

¥If you rewind the tape beyond Ò00:00:00Ó, a minus sign (ÒÐÓ) will be displayed in front of the time.

¥When you load a tape, the counter will reset to Ò00:00:00Ó.

¥The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter stops.

This function enables you to locate the beginning of any recording made on the VCR.

Recording an INDEX MARK

The Index search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.	CH 1
	INDEX

NOTES for Video index search system:

¥	When you record an INDEX
	mark at the very beginning of the
	tape, the mark may not be found.
¥	During INDEX search, the tape
	may stop and begin to play at a
	slightly different location.
¥	INDEX may not function properly
	with old or worn out video tapes.
¥	INDEX marks may not be found if
	it is extremely close to the point
	where the search began.
¥	In recording, if you stop record-