Pioneer DVR-RT501-S Dubbing Playback unit connection, Dubbing with Scart cable not supplied

Dubbing 07

Playback unit connection.

The playback unit can be a camcorder or a video recorder. See each operation manual for each playback operation. The copy protected video or DVD disc cannot be copied.

See ÒEXTERNAL AUDIO INPUTÓ on page 26 for how to switch the external audio input.

Dubbing with A/V-cable (or S-Video cable) (not supplied)

To playback unit	Press INPUT SELECT on the remote
A/V-cable (not supplied)	control repeatedly until A3 appears on the
	front display.
Recording unit	If the other VCR or camcorder is equipped
	with S-Video output, a superior picture will
	be achieved using an S-Video cable
	connected to the S-Video-input (AV3) on
AV3	the front panel with S-Video cable. In this
	case, you must select ÒS-VIDEOÓ mode in
	AV3 INPUT-setting on page 25.
S-Video cable (not supplied)	If you select ÒVIDEOÓ, only the composite
	video signal will be input. (S-Video input
	signal will be cut.)
	The S-Video input can be used only for
	recording on the disc. (The S-Video input
	cannot be used for recording on the video
	tape.)
Dubbing with SCART cable (not supplied)
To playback unit	Press INPUT SELECT on the remote
	control repeatedly until A2 appears on the
	front display.
SCART cable
(not supplied)
Recording unit

SCART cable (supplied)

TV-unit (not supplied)

81

En

2H30301B_En_78_81 81 8/4/05, 19:26