02Various settings
Setting the channel
This VCR/DVD has a
Preparation:
¥Turn ON the TV and select its AV channel (this may be labelled EXT / AUX etc.).
¥Select ÒCHANNEL SETUPÓ. For the procedure, see steps 1 to 3 in ÒUsing the SETUP MENUÓ on page 19.
SETUP MENU
TIMER REC SET | CHANNEL SETUP |
| |||
SYSTEM SETUP |
|
|
| PROCEED | |
| CH TUNING |
|
|
| |
AV SETUPAUTO TUNING |
|
| PROCEED | ||
REC SETUPGUIDE CH SET |
|
| PROCEED | ||
CHANNEL SETUP |
|
|
|
| |
OTHER |
|
|
|
|
|
| SELECT |
|
|
|
|
ENTER | ENTER | RETURN | BACK | SETUP | END |
Automatic station presetting
Select ÒAUTO TUNINGÓ and press ENTER.
The VCR/DVD will begin searching and storing all the broadcasting channels available in your area. While this is happening, ÒAUTO TUNINGÓ will be shown on the screen. When automatic tuning process is completed, the screen will return to normal.
NOTES:
¥ Your unit will tune the TV stations as follows.
CH1 | BBC1 |
CH2 | BBC2 |
CH3 | ITV |
CH4 | Channel 4 |
CH5 | Channel 5 |
CH6 | Satellite |
CH7 | etc. |
¥TV reception interference or power failure may result in Automatic station presetting malfunctions. In such a case repeat the setting procedure from the beginning.
If the automatic tuning procedure has problems receiving some stations correctly, you can try to preset the station manually (see page 29).
¥When the unit is in the auxiliary input mode, you cannot preset channels.
28
En
To skip a channel position
Unwanted channels can be skipped so that they cannot be called up by pressing CH + /
Example: Skip the channel position 29.
1Select ÒCH TUNINGÓ and press ENTER.
2Select ÒCHÓ and press ENTER. Then select the skipping channel position number (29) and press
ENTER.
CH29
SKIPOFF
3Select ÒSKIPÓ and press ENTER.
CH29
SKIPOFF
4Select ÒONÓ and press ENTER. Now this channel position is skipped.
NOTE: To cancel skipping, select ÒOFFÓ at step 4 above.
2H30301B_En_18_29 | 28 | 8/4/05, 19:20 |
