Oki 24DX manual Cyclic error, 158

5	Cyclic error
			Frequency		Remedy
		Image drum	3.71”	(94.2 mm)	Replace or clean the image drum cartridge.
		Developing roller	2.05”	(52.1 mm)	Replace the image drum cartridge.
		Toner supply roller	3.24”	(82.24 mm)	Replace the image drum cartridge.
		Charging roller	1.37”	(34.7 mm)	Replace the image drum cartridge.
		Cleaning roller	1.17”	(29.8 mm)	Replace the image drum cartridge.
		Transfer roller	2.28”	(58 mm)	Replace the transfer roller.
		Heat roller	3.46”	(88 mm)	Replace the fusing unit assy.
		Back-up roller	3.46”	(88 mm)	Replace the back-up roller.

Notes:

1.After replacing the image drum cartridge, set the printer in the user maintenance mode by turning the power on while pressing the MENU key, and reset the drum counter. (Refer to User’s Manual.)

2After replacing the fusing unit assy, set the printer in the engine maintenance mode by turning the power on while pressing the FORM FEED and ENTER keys, and reset the fuser counter. (Refer to See 4.1.)

40930701TH DRAFT Vesion 158 /