Oki 24DX manual 154, Abnormal images

6.5.3Image troubleshooting

Procedures for troubleshooting if abnormal images have been printed out are explained below. Figure 6-3 below shows typical abnormal images.

			Trouble			Flowchart number
Images are light or blurred as a whole (Figure 6-4,					A )	1
Dark background density (Figure 6-4,				B )		2
Blank paper is output		(Figure 6-4, C )				3
Black belts stripes in the vertical direction				(Figure 6-4,	D )	4
Cyclical defect (Figure		6-4,	E )			5
Print	voids					6
Poor	fusing					7
(images are blurred or peeled off when touched by hands)
White belts streaks in the vertical direction				(Figure 6-4,	F )	8
Snowy print of high density pattern (Figure 6-4, H )						9
Blockly faded print (Figrue 6-4,			I )			0

A Light or blurred	B Dark background	C Blank paper	D Black stripes in the
images as a whole	density		vertical direction

E Cyclical defect	F White belts or	H Snowy print of	I Blockly faded print
	streaks in the	highdensity pattern
	vertical direction

Figure 6-4 Abnormal images

40930701TH DRAFT Vesion 154 /