Oki 24DX manual 40930701TH Draft Vesion

3.3.28Lever-Paper end & Lever-Paper near end

(1)Turn the AC power switch off. Unplug the AC power cord from the outlet.

(2)Remove the frame main [See 3.3.12(7)]

(3)Remove screw 1 and then remove the PLATE-Base 2.

(4)Remove two Spacer-Cord(KGPS-5RF) 4 and then remove FILM-Insulation 4.

(5)Remove four screws 5 and then remove the FRAME ASS-Hopping 6.

(6)Remove the GEAR-Z58 9 and GEAR-Z42 8.

(At this time, the ADF Bearing 0 can also be detached simultaneously.)

(7)Remove the GEAR-Z38 D, ADF Bearing E, ROLLER-Guide Fand SHAFT Hopping Gand Bracket-Sub roller R.

(At this time, the Kock Pin H can also be detached simultaneously.)

(8)Remove two screws 7 and then remove the SPRING-Release A and then remove the LEVER-Sub roller B and PLATE-Hopping C.

(9)Remove the GEAR-Planet(Z28) I, Plate-Planet J, BRACKET-Spring (Sub) K and SPRING-Sub ROLLER L.

(10)Press the clamp part of Lever-Paper end M and Lever-Paper near end N. Remove the Lever-Paper end M and Lever-Paper near end N by pushing it upward from the FRAME Hopping R.

(11)Remove the Connection Cord-Wire O and TR-23-11-14 R CORE P together.

(12)Remove two Photo Sensor Q.

40930701TH DRAFT Vesion 87 /