3.3.6Stacker Assy, Damper Arm, Cover Rear
(1)Remove the
(2)Remove the
(3)Remove the OP panel assy. [See 3.3.4]
(4)Remove the
(5)Loosen 2 screws, unlock the both sides latches and remove the cover rear A.
(6)Unscrew 2 screws 1 and cover frame 2.
(7)Unscrew 3 screws 3 and remove the plate
(8)Remove the lever back up release 5 and unlock the engagement of the projection on the right side of gear at the right side of stacker cover.
(9)Remove a screw 6 and washer 7, and then remove the stacker assy 8. (At this time, the damper arm 9 can also be detached simultaneously.)
85
1
2
A | 6 |
| 7 |
9 3
0
4
40930701TH DRAFT Vesion | 64 / |