3.3.7Roller A
(1)Remove the motor bracket assy (see 3.3.5).
(2)Remove two gears 1 and then another gear 2.
(3)Disengage the plate 3 and the frame 4.
(4)Remove four screws 5 and remove the frame 4 (see 3.3.6).
(5)Move the belt to the right and remove it from the
(6)Move the carrier roller assembly to the right, and remove it from the shaft 7.
(7)Move the roller A 8 to the right, lift its left side, and then pull it off to the left. (Be careful not to lose the shaft 7 being removed together.)
51
2
5 4
1
5
8
7 6
3
Belt
7
Carrier roller assy
8 6
40930701TH DRAFT Vesion | 230 / |
