Oki 24DX manual F time-out between printer and optional tray Error, 150

5I/F time-out between printer and optional tray (ERROR 81) .

•Is an optional tray (2nd / 3rd tray or envelope feeder) used?

•	Yes	Is the connection between the Main board and the optional tray connected
		properly. (See Chapter 7.1.)
		•	No	Connect the cable properly.
▼
•	Yes	Replace the Main board.
▼
• Is the printer recovered?
		•	No	Isolate the trouble by following the 2nd/ 3rd tray or multi feeder
				maintenance manual. (See Appendix C or D.)
▼	YES	END
•
▼	Replace the Main board.
• No

6I/F time-out between printer and Duplex Unit (ERROR 83)

•Is an Duplex Unit used?

•	Yes	Is the connection between the Main board and the Duplex Unit connected
		properly. (See Chapter 7.1.)
		•	No	Connect the cable properly.
▼
•	Yes	Replace the Main board.
▼
• Is the printer recovered?
		•	No	Isolate the trouble by following the Duplex Unit maintenance manual.
				(See appendix C.)
▼	YES	END
•
▼	Replace the Main board.
• No

7I/F time-out occurs between the printer and the operator panel (ERROR 80) .

•Is the connecting cord of the operator panel connected to the PANEL connector of the Main board properly? (See Chapter 7.1.)

•No

▼

• Yes

Connect the connecting cord of the operating panel to the PANEL connector of the Main board properly.

Is the connecting cord defective?

•	Yes	Replace the connecting cord.
▼
•	No	Replace the operator panel assembly.
▼
• Is the printer recovered?
•	No	Replace the Main board.
▼	YES	END
•

40930701TH DRAFT Vesion 150 /