3.3.6Roller B
(1)Remove the upper cover (see 3.3.1 (1) to (3)).
(2)Disengage the plate and frame (on both sides).
(3)Remove the separator assy (see 3.3.1 (4) to (5)).
(4)Remove the
(5)Remove the motor bracket assy (see 3.3.5).
(6)Remove the gear 1.
(7)Shift the roller B 2 to the right, lift it by holding on its left side, and pull it out to the left side. The bearing 3 also comes off at the same time, so be careful not to lose it. Further, pay special attention to make sure that you do not damage the sensor lever 4while going through this procedure.
2
3
1
4
Frame
Plate
Engaging section
40930701TH DRAFT Vesion | 229 / |