2.MECHANISM DESCRIPTION
2.1General Mechanism
The sheet (or envelope) at the very bottom of the stack is fed into the printer, one at a time, when the Multi Feeder receives the signal from the printer.
(1)First, the hopping motor rotates in the direction of arrow D. The planet gear F moves to the direction of arrow G, and drives rollers A and B. The roller C is linked to pulley I which is on the same shaft as roller A, and it also turns at the same time as roller A. The paper is fed for a predesignated distance until the leading edge reaches roller C.
(2)Next, the hopping motor rotates in the direction of arrow E. The planet gear F moves to the direction of arrow H, and drives idle gear J. The rotation of idle gear J is transmitted to the gears linked to it, and drives pulley I on the same shaft as roller A, turning roller C to feed the paper into the printer, until it reaches the registration roller of the printer. During this process, a
Hopping motor | Planet gear F | |
Idle gear J | ||
|
Paper
Roller B |
|
|
Roller A Pulley I | Belt | Roller C |
2.2Hopper Mechanism
The hopper automatically feeds the printer with the paper being set, single sheet at a time.
Multi Feeder | Printer |
|
Roller (B)
Roller (A)
Roller (C)
Registration roller
40930701TH DRAFT Vesion | 219 / |
