Oki 24DX manual Gear E Clutch Feed Gear D Align Roller Main Motor

Pressure Roller
Regist Roller	Clutch (Regist)
Inlet Sensor
Write Sensor

c

Gear E

Clutch (Feed)

Gear D

Align Roller

Main Motor

(2)Feeding

After the end of hopping, the pulse motor dedicated for driving the registration roller rotates to drive the registration roller. The driven registration roller advances the paper until it comes out of the registration roller.

When leading edge of the paper causes the paper sensor to turn on, the printing is started synchronously.

Although Gear D is always rotating due to an all-time rotation of the main motor in direction c, the regist roller would not rotate because the clutch (regist) is turned off.

After the completion of hopping, turn on the clutch (regist) to drive the regist roller. The regist roller would drive a paper until the paper has passed.

40930701TH DRAFT Vesion 32 /