Moxa Technologies CP-132U Series user manual Installing the CP-132UL Series Board

Installing the CP-132UL Series Board

Step 1: Power off the PC.

Warning! To avoid damaging your system and board, make sure your computer is turned off before installing any board.

Step 2: Remove the PC’s cover.

Step 3: Remove the slot cover bracket if there is one.

Step 4: Plug the CP-132U Series control board firmly into a free 32-bit PCI slot or 64-bit PCI slot.

Step 5: Fasten the holding screw to fix the control board in place.

Step 6: Replace the system cover.

Step 7: Power on the PC. The BIOS will automatically set the IRQ and I/O address.

Note! Moxa Universal PCI or PCI boards will occupy one unique IRQ and I/O address, which are assigned automatically by the PCI BIOS.

Step 8: Proceed with the software installation discussed in the next chapter, “Software Installation.”

2-6 CP-132U Series User’s Manual