Furuno GD-3300 manual Waypoint entry at own ship’s position, Waypoint entry by range and bearing

5.Operate the trackball to place the cursor on position desired.

6.Press the [ENT] key.

7.Press the [WPT] key to finish.

Waypoint entry at own ship’s position

1.Press the [WPT] key to display the REGISTER WAYPOINT menu.

REGISTER WAYPOINT

MODE	= CURSOR L/L	OS POS.	R/B LIST
WPT NO.	= − −

ENTER WAYPOINT NO.

PRESS ENT TO REGISTER WAYPOINT. + : DISPLAY

− : NOT DISPLAY

Figure 4-4 REGISTER WAYPOINT menu

2.Select OS POS from the MODE field.

3.Select WPT NO.

4.Enter waypoint number in two digits.

5.Press the [ENT] key.

6.Press the [WPT] key to finish.

Waypoint entry by range and bearing

This method is useful when you want to enter a waypoint using range and bearing to a target found on radar.

1.Press the [WPT] key to display the REGISTER WAYPOINT menu.

2.Select R/B from the MODE field.

REGISTER WAYPOINT
MODE	= CURSOR	L/L OS POS.	R/B	LIST
WPT NO.	= − −
RANGE	= − − − . − − −	NM
BEARING	= − − − . − °	MAG

ENTER WAYPOINT NO., RANGE AND BEARING.

PRESS ENT TO DISPLAY WPT L/L.

PRESS ENT AGAIN TO REGISTER WAYPOINT. + : N, E, DISPLAY − : S, W, NOT DISPLAY

Figure 4-5 REGISTER WAYPOINT menu

4-4