5. Once the setting is completed...
Press the EXIT button to return to the FUNCTION menu.
To exit the main menu, press the EXIT button twice.
Information
PEAK LUMINANCE ENHANCEMENT (PLE)
AUTO ............. The brightness of the screen is
adjusted automatically to suit the picture quality.
LOCK ............. The brightness level is set to
minimum.
ORBITER
OFF | Orbiter mode does not function. |
ON | The picture gradually moves around |
| the screen to reduce the impact of |
| uneven aging. |
INVERSE
OFF | Inverse mode does not function. |
ON | The picture is displayed alternately |
| between positive image and negative |
| image. |
| You can set the time by pressing the |
| MENU/ENTER button while “ON” |
| is set. |
WT | The entire screen turns white. |
| You can set the time by pressing the |
| MENU/ENTER button while “ON” |
| is set. |
SCREEN WIPER
OFF | Screen wiper mode does not function. |
ON | Repeatedly moves the white vertical |
| bar from the left end of the screen to |
| the right end at a constant speed. |
| You can set the time by pressing the |
| MENU/ENTER button while “ON” |
| is set. |
Restoring the factory default settings
To restore the original factory settings, go back to the MAIN MENU. Select “FUNCTION,”and then select “RESET”. Note that this also restores other settings to the factory defaults.
*The PLE and ORBITER can only be adjusted when an RGB signal is displayed.
Setting the time for “INVERSE”
Set the “INVERSE” or “WHITE” display time and the “WAITING TIME”.
Example: Setting so that the INVERSE mode cycles on for 90 minutes and off for 30 minutes.
1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the MENU/ENTER button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.
3.Use the ▲ and ▼ buttons to select “INVERSE”, then use the and buttons to select “ON”.
L O N G L I F E
PLE | : | AUTO | ||
ORBITER | : | OFF | ||
INVERSE |
|
| : | ON |
| ||||
SCREEN WIPER | : | OFF | ||
SEL. MENU/ENTER OK EXIT RETURN
4.Press the MENU/ENTER button. The “INVERSE/WT” screen appears.
I N V E R S E / W T
WORKING TIME :
ON
SEL. | ADJ. | EXIT | RETURN |
5.Adjust the time using the and buttons and the ▲ and ▼ buttons.
The mode switches as follows each time the ▲ or ▼ button is pressed.
I N V E R S E / W T
WORKING TIME | : | 1H |
| : | 30M |
WAITING TIME | : | 0H |
| : | 30M |
SEL. | ADJ. | EXIT | RETURN |
The 1st line of the “WORKING TIME”:
ON or 0H 1H 2H 3H ... 12H
33
