PIP Screen Operations, Information | Mitsubishi Electronics PD-5010

PIP SCREEN Operations

Showing a couple of pictures on the screen at the same time

*An RGB-input picture may not be displayed in these modes, depending on the input signal specifications.

1.Press the PIP button to select a screen mode from among single mode, side by side, and picture in picture.

Operations in the Side-by-side mode

To change the picture size, press the cursor or button.


	VIDEO1				RGB/PC1

AB

Side by side


	VIDEO1				RGB/PC1
	VIDEO1				RGB/PC1

	A				B

Note:

Picture A and B on the above screen are not always of the same height.

Picture in picture

			RGB/PC1
VIDEO1			RGB/PC1

Main screen

Sub screen

Information

Multi screen operations may not function depending on the combination of input signals. In the table below, “0” means Yes, “X” means No.

				Pictures displayed on the right/main screen
		VIDEO1	VIDEO2	VIDEO3	HD/DVD1	HD/DVD2	RGB/PC1	RGB/PC2	RGB/PC3
Pictures	VIDEO1	X	X	X	0	0	0	0	0
displayed on	VIDEO2	X	X	X	0	0	0	0	0
the left/sub	VIDEO3	X	X	X	0	0	0	0	0
screen	HD/DVD1	0	0	0	X	0	0	0	0
	HD/DVD2	0	0	0	0	X	0	X	0
	RGB/PC1	0	0	0	0	0	X	X	X
	RGB/PC2	0	0	0	0	X	X	X	X
	RGB/PC3	0	0	0	0	0	X	X	X

Multi screen operations may not function depending on the type of the RGB signals.

button	button
VIDEO1	RGB/PC1
A	B
button	button
VIDEO1	RGB/PC1
A	B
	B

To swap the picture on the right and the left, press the cursor ▲ button.

VIDEO1 RGB/PC1

A	B

▲ button

RGB/PC1 VIDEO1

B

A

To make the desired picture active, press the SELECT button.

VIDEO1

RGB/PC1

A	B

SELECT button

VIDEO1 RGB/PC1

A	B

16

Image 22

Mitsubishi Electronics PD-5010 manual PIP Screen Operations, Showing a couple of pictures on the screen at the same time

Contents

Owner’s Guide Page Precautions Important Information To avoid damage and prolong operating life Contents Page Attachment Options for the PD-5010 Monitor Introduction Part Names and Function Rear View/ Terminal Board Remote Control Battery Installation and Replacement Using the wired remote control mode Installation Connecting Your PC or Macintosh Computer External Speaker Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Basic Operations Information After the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining time Wide Operations Watching with a wide screen manual Picture Size setting When Picture Size is set to OFFInformation Supported resolution Watching computer images Showing a couple of pictures on the screen at the same time Operations in the Side-by-side modePIP Screen Operations Information Selecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the ON-SCREEN Menu controls On Screen Menu Controls Menu Operations Main menu Sub menu Functions Default Information Video Settings screen Picture Settings MenuAdjusting the picture Adjusting the computer image Example Setting the Theater mode Information Types of picture modes Once the setting is completed Setting the color temperatureExample Setting LOW Information Setting the color temperature Example Adjusting the White Balance Adjusting the color to the desired qualityInformation Adjusting the white balance Reducing noise in the picture Example Setting NR-3Types of noise reduction Example Adjusting the bass Audio Settings MenuAdjusting the treble, bass and left/right balance Information Sound settings menu Example Adjusting the vertical position in the normal mode Monitor Settings MenuInformation When Auto Picture is OFF Example Turning the on-screen menu mode off Setting the on-screen menuFunction Menu To adjust the position Adjusting the position of the menu displayExample Adjusting the position of the menu display Information Adjusting the position of the menu display Information Power management function Setting the power management for computer imagesExampleTurning the power management function on Power management settings POWER/STANDBY indicator Example Adjusting the Gray Level Setting the gray level for the sides of the screenSetting the picture to suit the movie Example Setting the Cinema Mode to OFF Information When you adjust the M-LINK ADJ Setting Monitorlink M-LINK ADJExample Setting Example Setting PLE to Lock Setting the time for Inverse Peak Luminance Enhancement PLE Information Setting the time Setting the time for Screen WiperTo select on for the Working Time Resetting to the default values Speed Setting the BNC connectors Options Setting MenuSetting the allocation of the audio connectors Example Setting Audio 1 to Video To set the RGB select mode to Motion Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion See page 55 for the details of the above settings Setting the picture size for RGB input signals Setting high definition images to the suitable screen sizeInformation HD Select modes Information Language settings Setting the language for the menusExample Setting the menu display to Deutsch Information Menu Information Video signal formats Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc To select 3.58 Ntsc Connections External ControlApplication Communication Format Power OFF Command Reference ListPower on Input Switch Change Audio Mute Off Volume Gain DataAudio Mute On Contrast Gain Data Color Gain Data Picture Mode SelectRED Gain Data Blue Gain Data NR Mode SetGreen Gain Data Bass Gain Data 22. V. Position Gain Data Screen Mode SelectBalance Gain Data 23. H. Position Gain Data Clock Gain Data Phase Gain DataAuto Picture Select Menu Select Menu ADJ. Gain Data Power MGT SelectCinema Mode Set Gray Level Set Screen Wiper Set Inverse SetAudio Select Set Picture Size Select RGB SelectHD Select Language Select Color System Select Multi Screen Select Frequency Request Input Mode RequestHorizontal sync polarity Video ADJ Request Audio Select Request Failure Mode RequestModel Name Request Supported resolution Table of Signals SupportedComputer input signals supported by this system Page Troubleshooting Symptom Checks Remedy Specifications SignalsPage Mitsubishi Plasma Display Panel Limited Warranty