JVC KD-LX333, KD-LX111 manual To set the clock display Clock Disp, To select the level meter Level

ENGLISH

To set Custom Equalizer Link — CEQ LINK

A different sound mode (CEQ) can be stored in memory for each source so that you can change the sound modes simply by changing the sources. When shipped from the factory, this mode is deactivated.

•	LINK ON:	Different sound modes for
		different sources.
•	LINK OFF:	One sound mode for all
		sources.

To set the clock display — CLOCK DISP

You can set the clock to be shown on the display when the unit is turned on. When shipped from the factory, the clock is set to be shown on the display.

•CLOCK ON: Clock display is turned on.

•CLOCK OFF: Clock display is turned off.

To select the level meter — LEVEL

You can select the level meter display according to your preference. When shipped from the factory, “NORMAL” is selected.

• NORMAL:		Normal audio level meter will
		be shown on both sides of the
		display.
•	SIDE:	Display illumination moves from
		inside to outside.
•	FULL:	Level meter is fully shown on
		the main display and display
		illumination starts.
• OFF:		Level meter disappears but the
		center display illuminates.
• ALL OFF:		Level meter and center display
		turns off.

To select the dimmer mode — DIMMER

When you turn on the car head lights, the display automatically dims (Auto Dimmer). When shipped from the factory, Auto Dimmer mode is activated.

• AUTO:		Activates Auto Dimmer.
•	OFF:	Cancels Auto Dimmer.
•	ON:	Always dims the display.

Note on Auto Dimmer:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To turn on/off the key-touch tone

—BEEP SW

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

•	BEEP ON:	Activates the key-touch tone.
•	BEEP OFF:	Deactivates the key-touch tone.

To adjust the display contrast level

—CONTRAST

You can adjust the display contrast level among “1” (dark) to “10” (bright). When shipped from the factory, the display contrast level is set at level “5.”

To select the scroll mode — SCROLL

You can select the scroll mode for the disc information if it consists of more than 10 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”

• ONCE:		Scrolls only once.
•	AUTO:	Repeats the scroll
		(in 5-second intervals).
•	OFF:	Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP (D) for more than 1 second.

20