JVC KD-LX111, KD-LX333 Troubleshooting, Symptoms Causes Remedies, Longer screws than specified

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service centre.

	Symptoms		Causes	Remedies
•	CD cannot be played back.	CD is inserted upside down.		Insert the CD correctly.
• CD sound is sometimes		You are driving on rough roads.		Stop CD play while driving on
	interrupted.			rough roads.
		CD is scratched.		Change the CD.
		Connections are incorrect.		Check the cords and
				connections.
• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.		• Insert a finalized CD-R/
	played back.			CD-RW.
• Tracks on the CD-R/CD-RW				• Finalize the CD-R/CD-RW
	cannot be skipped.			with the component which
				you used for recording.
• “EJECT ERR” appears on the		The CD player may function		Press and hold 4		for
	display and CD cannot be	incorrectly.		more than 5 seconds.
	ejected.
• No message appears on the				While holding	¢, press the
	display but CD cannot be			reset button. Release the reset
	ejected.			button, then release		¢.
				(Be careful not to drop the CD
				when ejecting.)
•	Sound cannot be heard from	The volume level is set to the		Adjust it to the optimum level.
	the speakers.	minimum level.
		Connections are incorrect.		Check the cords and
				connections.
•	SSM (Strong-station	Signals are too weak.		Store stations manually.
	Sequential Memory)
	automatic preset does not
	work.
•	Static noise while listening to	The antenna is not connected		Connect the antenna firmly.
	the radio.	firmly.
• “NO DISC” appears on the		No CD is in the magazine.		Insert CD.
	display.
• “RESET 8” appears on the		This unit is not connected to a		Connect this unit and the CD
	display.	CD changer correctly.		changer correctly and press the
				reset button of the CD changer.
• “RESET 1” – “RESET 7”				Press the reset button of the
	appears on the display.			CD changer.
• When “ERR 20” to “ERR 40”		There is something blocking the		Press the reset button on the
	appears on the display.	control cover movement.		front panel. (See page 2.)
				If the reset button does not
				works, check the Installation/
				Connection Manual (separate
				volume). (Ex.: You have used a
				longer screws than specified.)
•	This unit does not work at all.	The built-in microcomputer may		Press the reset button on the
•	The CD changer does not	function incorrectly due to		front panel. (See page 2.)
	work at all.	noise, etc.

ENGLISH

29