Speaker installation option

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

Do not attempt to attach these speakers to walls using methods other than those described in this manual.

1 Drive a screw (not supplied) into the wall.

Troubleshooting guide

Before requesting service, please perform the following steps.

Do you have the latest firmware installed?

Firmware updates may be released to correct operating irregularities that are discovered with certain movies. ( 17)

4

Make the following checks and visit our website for more information.

http://www.panasonic.com/help

Enter the model number.

4

Or visit our website to find a service center.

AAt least 30 mm (1 3/16q) B ‰ 4.0 mm (5/32q)

C ‰ 7.0 mm to ‰ 9.4 mm (9/32q to 3/8q)

D Wall or pillar

E 5.5 mm to 7.5 mm (7/32q to 5/16q)

 

 

 

 

You can find a service center near you easily on our website.

Other support information:

“Customer Services Directory (United States and Puerto Rico)” ( 43)

The following do not indicate a problem with this unit: jRegular disc rotating sounds.

jImage disturbance during search.

2 Fit the speaker securely onto the screw(s) with the hole(s).

e.g., Front speaker

DO NOT

DO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ In this position, the

≥ Move the speaker so that

speaker will likely fall if

the screw is in this

moved to the left or right.

position.

 

 

 

 

 

 

 

 

 

 

Use the measurements indicated below to identify the screwing positions on the wall.

Leave at least 20 mm (25/32q) of space above the speaker and 10 mm (13/32q) on each side to allow enough space for fitting the speaker.

jImage disturbance when replacing 3D discs.

Unit does not respond to the remote

control or front panel buttons.

Press and hold [POWER Í/I] on the main unit for 5 seconds. jIf still unable to power the unit off, disconnect the power cord,

wait 1 minute, then reconnect the power cord.

Cannot eject disc.

The unit may have a problem.

While the unit is off, press and hold [9] on the remote control and [< OPEN/CLOSE] on the unit at the same time for more than 5 seconds.

General operation

To return to the factory preset

Front speaker, Surround speaker

F40 mm (1 9/16q) G 17.6 mm (11/16q) H 98.7 mm (3 7/8q)

Center speaker

I23 mm (29/32q)

J 95 mm to 97 mm (3 3/4q to 3 13/16q)

K 26 mm (1 1/32q) L 16.7 mm (21/32q) M 63.7 mm (2 1/2q)

 

 

 

 

 

Select “Yes” in “Restore Default Settings” in the Setup menu. ( 34)

To return all settings to the factory preset

Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME], [< OPEN/ CLOSE] and [POWER Í/I] on the main unit at the same time for more than 5 seconds.

The remote control doesn’t work properly.

≥ Change the batteries in the remote control. ( 9)

The remote control and main unit are using different codes. If

“SET ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control. ( 34)

VQT3M40

Disc cannot be played. ≥ The disc is dirty. ( 9)

Check the region code.

36

Page 36
Image 36
Panasonic BTT268 owner manual Speaker installation option, Troubleshooting guide, General operation, Attaching to a wall

BTT268 specifications

The Panasonic BTT268 is a versatile home theater system designed to offer an immersive audio-visual experience. Combining cutting-edge technology with user-friendly features, this system caters to home entertainment enthusiasts who seek quality sound and picture.

One of the main highlights of the BTT268 is its 5.1 channel surround sound system, which includes a powerful subwoofer and five satellite speakers. This setup allows for a truly cinematic experience, filling the room with rich, multi-dimensional sound. Whether you're watching movies, playing video games, or listening to music, the audio quality delivered by the BTT268 elevates every sound to make it feel more realistic and engaging.

The BTT268 also boasts advanced audio technologies, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless audio compression, ensuring that the sound quality remains pristine, as intended by the creators. Additionally, the system features Panasonic's Adaptive Sound Control, which optimizes the audio output based on the content being played, enhancing dialogue clarity in movies and providing punchy bass for action scenes.

In terms of connectivity, the BTT268 is equipped with multiple HDMI inputs, allowing users to connect various devices effortlessly, such as Blu-ray players, gaming consoles, and streaming devices. The system also supports 3D playback, making it a great choice for those who enjoy watching 3D movies at home.

Moreover, the Panasonic BTT268 integrates a built-in Wi-Fi connectivity feature, allowing users to access streaming services like Netflix and YouTube directly through the system. Additionally, it supports DLNA, which makes it easy to stream media from compatible devices on your home network.

The design of the BTT268 is sleek and modern, making it a stylish addition to any living room setup. Its compact size does not compromise performance, and the system can easily fit into various spaces without overpowering your décor.

In conclusion, the Panasonic BTT268 is a top-tier home theater system that combines impressive sound quality, advanced audio technologies, and convenient connectivity features. Whether you are a movie buff, a gaming enthusiast, or simply enjoy great music, the BTT268 promises to deliver a high-fidelity audio-visual experience that enhances every moment of your entertainment.