Panasonic BTT268 owner manual Display

Subtitle Language

Choose the language for the subtitle.

≥If “Automatic” is selected and the language selected for “Audio Language” is not available, subtitles of that language will automatically appear if available on that disc.

≥Enter a code (> 40) with the number buttons when you select “Other ¢¢¢¢”.

Menu Language

Choose the language for the disc menus.

≥Enter a code (> 40) with the number buttons when you select “Other ¢¢¢¢”.

BD-Live Internet Access (> 21)

You can restrict Internet access when BD-Live functions are used.

≥If “Allow ( Limited )” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

Video

Still Mode (paused video)

Select the type of picture shown when you pause playback.

Auto	Automatically selects the type of picture
	shown.
Field	Select if jittering occurs when “Auto” is
	selected.
Frame	Select if small text or fine patterns cannot
	be seen clearly when “Auto” is selected.

Digital Audio Input

Press [OK] to show the following settings:

PCM-FIX

Select the following audio signal to input. jARC

jDIGITAL IN

≥“On”: PCM is available.

≥“Off”: DTS, PCM and Dolby Digital are available. Select “On” if the sound is cut off intermittently.

Downmix

Select the downmix system to enjoy multi-channel or 2-channel sound.

≥Select “Surround encoded” to enjoy the surround sound.

≥There is no downmix effect on the bitstream audio signal.

≥The audio will be output in “Stereo” in the following cases:

–AVCHD playback

–Dolby TrueHD playback

–Playback of secondary audio (including the button click sound).

High Clarity Sound

When connected to TV via the HDMI AV OUT terminal for outputting image, it produces clearer sound.

≥Set to “Enable” and then set “High Clarity Sound” on the Playback menu to “On”. (> 31)

Audio Delay

Mis-sync between the video and audio is corrected by delaying the audio output.

Seamless Play

The chapter segments in playlists are played seamlessly.

≥Select “On”, when the picture freezes for a moment at the chapters segment in playlists.

Black Level Control

Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement.

Audio

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥“Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output

Press [OK] to show the following settings:

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

Select the audio signal to output.

≥Select “PCM”, when the connected equipment cannot decode the respective audio format.

≥Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 21)

VQT3M40 ≥ If “Off” is selected, the unit outputs the primary audio only.

32

Speaker

Refer to page 35

Display

Status Messages

Choose whether to show status messages automatically.

On-screen Language

Choose the language for menus and on-screen messages.

Screen Saver Function

This is to prevent burn-in on the screen.

≥When this is set to “On”:

If there is no operation for 5 minutes or more, DIRECT NAVIGATOR screen switches to HOME menu automatically.

≥While playing and pausing, etc., this function is not available.

≥While playing music (CD-DA or MP3), after about 5 minutes DIRECT NAVIGATOR screen switches to a blank screen with “Screen Saver” message.

Front Panel Display

Changes the brightness of the unit’s display.

≥If “Auto” is selected, the display is dimmed but brightens when you perform some operations.

License

Information about the software used by this unit is displayed.