Setting MONITORLINK (M-LINK) ADJ.
When the picture input from the MONITORLINK input terminal is distorted, select the most appropriate setting from among “1”, “2”, and “3”.
Example: Setting “2”
Press the MENU/ENTER button on the remote control to
display MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the MENU/ENTER button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select
F U N C T I O N
MENU | : | ON | |
MENU ADJ. | : | 1 | |
POWER MGT | : | OFF | |
GRAY LEVEL | : | 3 | |
CINEMA MODE | : | ON | |
|
| : | 1 |
| |||
LONG LIFE
RESET
SEL. | ADJ. | EXIT | RETURN |
3. To select “2”...
Use the and buttons to select “2”.
The mode switches as follows each time the or buton is pressed:
123
F U N C T I O N
MENU | : | ON | |
MENU ADJ. | : | 1 | |
POWER MGT | : | OFF | |
GRAY LEVEL | : | 3 | |
CINEMA MODE | : | ON | |
|
| : | 2 |
| |||
LONG LIFE
RESET
SEL. | ADJ. | EXIT | RETURN |
4.Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
Information
NOTE:
When you adjust the M-LINK ADJ.
The position of the menu display will change. In such a case, be sure to adjust the position.
Restoring the factory default settings
To restore the original factory settings, go back to the MAIN MENU. Select “FUNCTION,”and then select “RESET”. Note that this also restores other settings to the factory defaults.
Reducing uneven aging of the screen
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce uneven phosphor aging of the screen.
Example: Setting “PLE” to “LOCK”
Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then proceed as follows.
1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the MENU/ENTER button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.
F U N C T I O N
MENU | : | ON | |||
MENU ADJ. | : | 1 |
|
| |
POWER MGT | : | OFF | |||
GRAY LEVEL | : | 3 |
|
| |
CINEMA MODE | : | ON | |||
: | 1 |
|
| ||
LONG LIFE |
|
|
|
| |
RESET |
|
|
|
| |
SEL. |
| OK |
|
| RETURN |
MENU/ENTER |
| EXIT | |||
The “LONG LIFE” screen appears.
3. Use the ▲ and ▼ buttons to select “PLE”.
L O N G L I F E
PLE | : | AUTO |
ORBITER | : | OFF |
INVERSE | : | OFF |
SCREEN WIPER | : | OFF |
SEL. | ADJ. | EXIT | RETURN |
4.Use the and buttons to select “LOCK”.
The mode switches as follows each time the or button is pressed:
AUTO LOCK
L O N G L I F E
PLE | : | LOCK |
ORBITER | : | OFF |
INVERSE | : | OFF |
SCREEN WIPER | : | OFF |
SEL. | ADJ. | EXIT | RETURN |
32
