Grey Headline (continued)
System Administrator Access
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Web Interface
General page features
These are the features that can be found on some or all of the web UI pages.
Note that you will not be able to change settings if your admin account is read only.
Information bar
The VCS provides you with feedback in certain situations, for example when settings have been saved or when you need to take further action. This feedback is given in a yellow information bar at the top of the page.
Sorting Columns
Click on column headings to sort the information in ascending and descending order.
Select All and Unselect All
Use these buttons to select and unselect all items in the list.
Status
On configuration pages, this section shows you the current status of the items you are configuring.
Note that some configuration requires a reboot to take effect, so if you have changed the configuration but not yet rebooted this will show the existing (unchanged) status.
System Information
Each page will always show the system name (or LAN 1 IPv4 address if no system name is configured) at the bottom left corner, and the hardware serial number and VCS software version at the bottom right corner.
Page name and Location
Every page shows the page name and the menu path that you took to get there. Each part of the menu path is a link; clicking on any of the higher level menu items will take you to that page.
System Warning
This icon appears on the top right corner of every page when there is a system warning in place. Click on this icon to go to the Warnings page which gives information about the warning and its suggested resolution.
User
The username of the administration account used to log in to the VCS.
Log out
This icon appears on the top right corner of every page. Clicking on this icon will end your Administrator session. You will be taken to the Administrator Login page.
View manual
This icon appears on the top right corner of every page. Clicking on this icon will take you directly to the latest version of the VCS Administrator Guide on the TANDBERG website.
Information box
A yellow information box will appear on the configuration pages whenever you either click on the Information icon or click inside a field. This box gives you information about the particular field, including where applicable the valid ranges and default value.
To close the information box, click on the X at its top right corner.
Information
This icon appears to the right of most input fields in the web interface.
Clicking on this icon will activate the Information Box.
Introduction | Getting Started | Overview and |
| System |
| VCS |
| Zones and |
| Call |
| Bandwidth |
| Firewall |
| Applications |
| Maintenance |
| Appendices |
Status |
| Configuration |
| Configuration |
| Neighbors |
| Processing |
| Control |
| Traversal |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.04 |
|
|
|
|
|
|
| 25 |
|
|
|
|
|
|
|
|
|
| ||
JULY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
