Grey Headline (continued)

Installation

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

What’s in the Box?

To avoid damage to the unit during transportation, the TANDBERG VCS is delivered in a special shipping box, which should contain the following components:

TANDBERG VCS

CD containing VCS Administrator Guide and other documentation

Installation Sheet

Registration card

Rack ears and screws

Cables:

power cables

ethernet cable

shielded serial cable

Please report any discrepancies to your TANDBERG representative immediately.

A brief yet concise description of the procedure to get you up and going can be found in the Installation Sheet accompanying your TANDBERG product.

Installation Site Preparations

Make sure that the VCS is accessible and that all cables can be easily connected.

For ventilation: leave a space of at least 10cm (4 inches) behind the VCS’s rear panel and 10cm (4 inches) in front of the front panel.

The room in which you install the VCS should have an ambient temperature between 0ºC and 35ºC (32ºF and 95ºF) and between 10% and 90% non-condensing relative humidity.

Do not place heavy objects directly on top of the VCS.

Do not place hot objects directly on top, or directly beneath the VCS.

Use a grounded AC power outlet for the VCS.

General Installation Precautions

The socket outlet shall be installed near to the equipment and shall be easily accessible.

Never install cables without first switching the power OFF.

Shielded serial cable

To control the VCS using a direct connection to a PC, connect the serial cable between the VCS’s DATA port and the COM port on a PC.

Connecting the Cables

Ethernet cable

To use the VCS over IP, connect the ethernet cable from the LAN1 port on the VCS to your network.

The LAN2 port can also be

used if you have the Dual

Network Interfaces option Soft power button installed.

The LAN3 and LAN4 ports are not used.

Power switch

Power cable

Connect the system power cable to an electrical distribution socket.

Introduction

Getting Started

Overview and

 

System

 

VCS

 

Zones and

 

Call

 

Bandwidth

 

Firewall

 

Applications

 

Maintenance

 

Appendices

Status

 

Configuration

 

Configuration

 

Neighbors

 

Processing

 

Control

 

Traversal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D14049.04

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

JULY 2008

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 20
Image 20
TANDBERG D14049.04 manual What’s in the Box?, Installation Site Preparations, General Installation Precautions