Grey Headline (continued)

Command Reference - xConfiguration

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

LDAP Server Port: <1..65534>

Sets the IP port of the LDAP server to be used when making LDAP queries.

Default: 389

Example: xConfiguration LDAP Server Port: 389

LDAP UserDN: <S: 0, 255>

Sets the user distinguished name to be used when binding to the LDAP server.

Example: xConfiguration LDAP UserDN: "User123"

Log Level: <1..4>

Controls the granularity of event logging. 1 is the least verbose, 4 the most.

Note: this setting is not retrospective; it will determine which events are written to the event log from now onwards.

Default: 1

Example: xConfiguration Log Level: 1

Log Server Address: <S: 0, 128>

Specifies the IP Address or Fully Qualified Domain Name (FQDN) of the remote syslog server to which the log will be written. This server must support the BSD syslog protocol. It cannot be another VCS.

Example: xConfiguration Log Server Address: "syslog.server.example.com"

NTP Address: <S: 0, 128>

Sets the IP Address or Fully Qualified Domain Name (FQDN) of the NTP server to be used when synchronizing system time.

Example: xConfiguration NTP Address: "ntp.server.example.com"

Option [1..64] Key: <S: 0, 90>

Specifies the option key of your software option. These are added to the VCS in order to add extra functionality, such as increasing the VCS’s capacity. Contact your TANDBERG representative for further information.

Example: xConfiguration Option 1 Key: "1X4757T5-1-60BAD5CD"

Policy AdministratorPolicy Mode: <On/Off>

Enables and disables use of Administrator Policy.

Default: Off

Example: xConfiguration Policy AdministratorPolicy Mode: Off

Introduction

Getting Started

 

Overview and

 

System

 

VCS

 

Zones and

 

Call

 

Bandwidth

 

Firewall

 

Applications

 

Maintenance

 

Appendices

 

Status

 

Configuration

 

Configuration

 

Neighbors

 

Processing

 

Control

 

Traversal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D14049.04

 

 

 

 

 

 

 

 

222

 

 

 

 

 

 

 

 

 

 

JULY 2008

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 222
Image 222
TANDBERG D14049.04 manual 222