Grey Headline (continued)

Configuring the VCS as a Traversal Client

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Configuring a Traversal Client Zone

VCS Configuration > Zones.

You will be taken to the Zones page. Click on the name of the zone you wish to configure.

You will be taken to the Edit Zone page.

xConfiguration Zones Zone [1..200]

xConfiguration Zones Zone [1..200] Traversal Client

Hop count

Specifies the hop count to be used when querying this zone.

Authentication username

This field displays the Authentication username that has been configured on this VCS. The Authentication username and password are system-wide settings that are used for all Traversal Client Zones. The Authentication username cannot be edited directly from this page but it is shown here for reference as it

is needed when configuring the corresponding Traversal Server Zone.

To edit the Authentication username, click on the Edit Authentication Username/Password link. This will take you to the Authentication page, where you can edit the settings under the External Registration Credentials section.

Peer 1 to Peer 6 address

The IP Address or FQDN of the traversal server. If the traversal server is a VCS cluster, this includes all of its Peers. See the section Neighboring the Local VCS to a Cluster for more information.

SIP mode

Determines whether SIP calls will be allowed to and from this zone.

SIP port

Specifies the port on the traversal server to be used for SIP calls from this VCS.

SIP transport

Determines which transport type will be used for SIP calls to and from the traversal server.

H.323 mode

Determines whether H.323 calls will be allowed to and from this zone.

H.323 protocol

Determines which of the two firewall traversal protocols to use for calls to the traversal server.

H.323 port

Specifies the port on the traversal server to be used for H.323 firewall traversal calls.

Retry interval

Specifies the interval in seconds with which a failed attempt to establish a connection to the traversal server should be retried.

Remember to Save your changes.

Introduction

Getting Started

 

Overview and

 

System

 

VCS

 

Zones and

 

Call

 

Bandwidth

Firewall

Applications

 

Maintenance

 

Appendices

 

Status

 

Configuration

 

Configuration

 

Neighbors

 

Processing

 

Control

Traversal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D14049.04

 

 

 

 

 

 

 

 

157

 

 

 

 

 

 

 

 

JULY 2008

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 157
Image 157
TANDBERG D14049.04 manual 157, Configuring a Traversal Client Zone