TANDBERG D14049.04 manual Viewing the IP Status Understanding the IP Status

Models: D14049.04

1 276
Download 276 pages 37.25 Kb
Page 31
Image 31

Grey Headline (continued)

IP Status

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Viewing the IP Status Page

 

Understanding the IP Status Page

 

 

 

The IP Status page provides details of the IP and DNS settings of the VCS.

To view the IP Status page:

Status > System > IP

Protocol

Indicates the IP protocol supported by the VCS.

IPv4: The VCS will only accept registrations from endpoints using an IPv4 address, and will only take calls between two endpoints or devices communicating via IPv4. It will communicate with other systems via IPv4 only.

IPv6: The VCS will only accept registrations from endpoints using an IPv6 address, and will only take calls between two endpoints communicating via IPv6. It will communicate with other systems via IPv6 only.

Both: The VCS will accept registrations from endpoints using either an IPv4 or IPv6 address, and will take calls using either protocol. If a call is between an IPv4-only and an IPv6-only endpoint, the VCS will act as an IPv4 to IPv6 gateway (note that this will require a traversal call licence). The VCS can communicate with other systems via either protocol.

Server 1..5 address

The IP address(es) of each of the DNS servers that will be queried when resolving domain names. Up to 5 DNS servers may be configured.

Domain

Specifies the name to be appended to the host name before a query to the DNS server is executed.

Introduction

Getting Started

Overview and

System

 

VCS

 

Zones and

 

Call

 

Bandwidth

Status

Configuration

 

Configuration

 

Neighbors

 

Processing

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D14049.04

 

 

 

 

 

 

31

 

 

JULY 2008

 

 

 

 

 

 

 

 

IPv4 gateway

The IPv4 gateway used by VCS.

IPv6 gateway

The IPv6 gateway used by VCS.

Dual Network Interfaces

Indicates whether the second LAN port has been enabled. This is done by installing the Dual Network Interfaces option key.

LAN 1

Shows the IPv4 Address and subnet mask, and

IPv6 Address of the LAN1 port.

LAN 2

If the Dual Network Interfaces option key has been installed, this shows the IPv4 Address and subnet mask, and IPv6 Address of the LAN2 port.

Firewall

Applications

 

Maintenance

 

Appendices

Traversal

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 31
Image 31
TANDBERG D14049.04 manual Viewing the IP Status Understanding the IP Status