TANDBERG D14049.04 156, Configuring the VCS as a Traversal Client, TraversalClient Create Zone

Grey Headline (continued)

Configuring the VCS as a Traversal Client

TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE

Overview

To enable your VCS to act as a traversal client on behalf of its endpoints and neighbor gatekeepers, you must create a connection between it and a traversal server (e.g.

a TANDBERG VCS Expressway or Border Controller).

You do this by adding a new traversal client zone on the VCS client and configuring it with the details of the traversal server.

Adding a New Traversal Client Zone

•VCS Configuration > Zones.

You will be taken to the Zones page. Select New.

You will be taken to the Create Zone page.

•xCommand ZoneAdd

Name

Enter the name you wish to give to this zone. The name acts as a unique identifier, allowing you to distinguish between zones of the same type.

Type

From the Type drop-down menu, select

TraversalClient.

Create Zone

Click here to create the zone. You will be taken directly to the Edit Zone page, where you can configure the traversal client zone as required.

You can create more than one traversal client zone if you wish to connect to multiple traversal servers.

Introduction	Getting Started	Overview and	System	VCS	Zones and	Call	Bandwidth	Firewall	Applications	Maintenance	Appendices
		Status	Configuration	Configuration	Neighbors	Processing	Control	Traversal
D14049.04					156
JULY 2008