Tyco Electronics ET2200L manual Touchmonitor Safety

APPENDIX

A

TOUCHMONITOR SAFETY

This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your touchmonitor, read through this manual, especially Chapter 2 (Installation and Setup), and Chapter 3 (Operation).

1To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor case.

2Turn off the product before cleaning. (Please refer to Care and Handling of Your Touchmonitor on the following page for proper cleaning methods.)

3Your touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only fits into a grounded outlet. Do not attempt to fit the plug into an outlet that has not been configured for this purpose. Do not use a damaged power cord. Only use the power cord that comes with your Elo TouchSystems Touchmonitor. Use of an unauthorized power cord may invalidate your warranty.

4The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert anything inside the venti- lation slots.

5It is important that your touchmonitor remains dry. Do not pour liquid into or onto your touchmonitor. If your touchmonitor be- comes wet do not attempt to repair it yourself.

Elo TouchSystems 2200L User Guide 24